Posted: Sep 10 2010 at 9:30am | IP Logged

That may not be what they are called.   It may be called a link pin bushing.  At any rate, the bushings appear to be shot and it rattles on bumps.  Pic above identifies the item in question (arrow) on the driver's side.  I need to know how to get new bushings on the pin that runs through the end of the sway bar.  This is a 2000 Frontier, 4L auto trans 2wd.

Posted: Sep 11 2010 at 5:38am | IP Logged

bcaughhorn wrote: its a long bolt. follow it down there is a nut on the bottom. pull the nut off and pull ithe bolt out. pay attention to where pieces the pieces come from. its a easy job

That appears to free it from the frame, but it's still attached to the end of the sway bar.  Can I assume that the nut on top has to come off too to remove the bolt from the end of the sway bar and put on the bushings?