Posted: Jan 31 2007 at 9:18pm | IP Logged
|
|
|
..
skogen1260;
Welcome to the Frontier group!
... IMHO Highway cruising while continually gently changing speed and remaining well under 4000 RPM. In the old days they used to use a no detergent break in oil for the first 500 miles. I don’t think they do that any more but doing the first oil change is not a bad idea in my estimation.
... The oil filter is an item that is very important to engine life as is running the engine at the temperature that it and the oil was designed for. There have been tests on various brands of oil filters that say Wix and Purolator made filters are the best. I use the stock Nissan truck filter and save the old ones to back up my extended warrantee. I use Wally-World Super Tech full synthetic 10W-30 that is rumored to the same as Pennzoil full synthetic. I don't carry heavy loads. I change the oil and filter at 4,000 miles and the AT at 30,000.
... I let the engine warm up at least a minute before putting it in gear then drive gently for a couple for miles before laying rubber! Below 40 degrees I let it warm up several minutes.
Have a good one, and Carry on with the insanity.. Don S..
__________________ PLEASE >>> A SIG similar to mine can be VERY HELPFUL to all the members!
'99 4x4 3.3 Frontier Se KC Auto, 48,000 miles
'76 4x4 401 Wagoneer QT
'04 FWD 1.8 Sentra '08 FWD 2.4 Camry LE
Fort Worth
|